[j-nsp] Issues setting up LACP between M40 and Cisco 6500 CATOS

Nicolaj Kamensek nk at accelerated.de
Thu May 3 13:46:45 EDT 2007


Dan Benson wrote:
> Thank you all for the help here.  I have one last  question on this 
> matter.  Is there more config that needs to be done on the juniper side 
> to load balance across these links?  I see in the cisco I can configure 
> it to balance based on MAC sorce/destination.  I have read that the 
> juniper does this based on IP destination.  Does it do so by default?  


Here is what we do:

{master}[edit forwarding-options]
nico at re0# show hash-key
family inet {
     layer-4;
}

By doing that, we almost have a 50:50 load-sharing.

Best regards,
Nico

-- 
Accelerated IT Services GmbH
Schubertstrasse 10                        D-67251 Freinsheim
nk at accelerated.de                         http://www.accelerated.de/
Telefon: +49 6232 - 672568                Telefax: +49 6353 - 989039
HRB: 60665 - Amtsgericht Ludwigshafen     UstID: DE253684415
Geschäftsführende Gesellschafter:         Nicolaj Kamensek & Ole Krieger


More information about the juniper-nsp mailing list