[j-nsp] GRE tunnel between PE-PE over non-MPLS core

Cliff DeGuzman cliff at juniper.net
Wed May 9 18:26:41 EDT 2007


Bei,
 
Vpn routes use table inet.3 for next-hop resolution.  What does "show
route table inet.3" give you?
 
- Cliff


________________________________

	From: Bei Zhou 
	Sent: Wednesday, May 09, 2007 3:16 PM
	To: juniper-nsp at puck.nether.net; te-hackers; systest
	Subject: GRE tunnel between PE-PE over non-MPLS core
	
	

	Hi,

	 

	Have anyone used GRE tunnel bwteen PE-PE over non-MPLS core? I
encountered an issue that the VPN routes are been added to routing
table, but not installed in the forwarding table. Has anyone seen this
issue before? Thanks.

	 

	The VPN route 10.255.70.154 learned from far end PE is installed
in the routing table, but not installed in the forwarding table.

	 

	regress at zosca# run show route table vpna

	 

	vpna.inet.0: 8 destinations, 9 routes (8 active, 0 holddown, 0
hidden)

	+ = Active Route, - = Last Active, * = Both

	 

	10.255.70.154/32   *[BGP/170] 00:26:08, MED 1, localpref 100,
from 10.255.245.222

	                      AS path: I

	                    > via gr-3/0/0.0, Push 100464

	10.255.70.250/32   *[OSPF/10] 00:26:44, metric 1

	                    > via so-0/2/0.0

	20.255.66.114/32   *[Direct/0] 00:26:44

	                    > via lo0.1

	20.255.245.222/32  *[BGP/170] 00:26:08, localpref 100, from
10.255.245.222

	                      AS path: I

	                    > via gr-3/0/0.0, Push 100448

	22.22.22.0/24      *[Direct/0] 1d 03:19:47

	                    > via so-0/2/0.0

	                    [OSPF/10] 1d 03:19:45, metric 1

	                    > via so-0/2/0.0

	22.22.22.2/32      *[Local/0] 1d 03:19:50

	                      Local via so-0/2/0.0

	33.33.33.0/24      *[BGP/170] 00:26:44, localpref 100, from
10.255.245.222

	                      AS path: I

	                    > via gr-3/0/0.0, Push 100432

	224.0.0.5/32       *[OSPF/10] 1d 03:19:50, metric 1

	                      MultiRecv

	 

	regress at zosca# run show route forwarding-table table vpna

	Routing table: vpna.inet

	Internet:

	Destination        Type RtRef Next hop           Type Index
NhRef Netif

	default            perm     0                    rjct   409
1

	0.0.0.0/32         perm     0                    dscd   407
1

	10.255.70.250/32   user     0                    ucst   395
3 so-0/2/0.0

	20.255.66.114/32   intf     0 20.255.66.114      locl   446
1

	22.22.22.0/24      intf     0 ff.3.0.21          ucst   435
1 so-0/2/0.0

	22.22.22.0/32      dest     0 22.22.22.0         recv   437
1 so-0/2/0.0

	22.22.22.2/32      intf     0 22.22.22.2         locl   434
1

	22.22.22.255/32    dest     0 22.22.22.255       bcst   436
1 so-0/2/0.0

	224.0.0.0/4        perm     1                    mdsc   408
1

	224.0.0.1/32       perm     0 224.0.0.1          mcst   403
3

	224.0.0.5/32       user     1 224.0.0.5          mcst   403
3

	255.255.255.255/32 perm     0                    bcst   405
1

	 

	And following messages are found in the log:

	May  9 14:40:53  zosca rpd[19148]: cannot perform nh operation
ADDANDGET nhop 0.0.0.0 type unicast index 0 errno 2

	May  9 14:40:55  zosca last message repeated 9 times

	May  9 14:40:55  zosca rpd[19148]: Indirect next hop operation 2
on protocol next hop 10.255.245.222 table id 83886084 tag 16711938 index
0 (0x8ad1138) attempts=3 failed, error "No such file or directory"

	May  9 14:40:55  zosca rpd[19148]: cannot perform nh operation
ADDANDGET nhop 0.0.0.0 type unicast index 0 errno 2

	May  9 14:40:55  zosca rpd[19148]: Indirect next hop operation 2
on protocol next hop 10.255.245.222 table id 83886084 tag 16711938 index
0 (0x8ad11d4) attempts=3 failed, error "No such file or directory"

	May  9 14:40:56  zosca rpd[19148]: cannot perform nh operation
ADDANDGET nhop 0.0.0.0 type unicast index 0 errno 2

	May  9 14:41:05  zosca last message repeated 34 times

	 

	 



More information about the juniper-nsp mailing list