[j-nsp] Problem with boot after JunOS upgrade (7.5 -> 8.1R3.3)

[Juan C. Crespo R.]

jinstall images are for clean install, the correct image for update its 
jbundle

Regards :D

JC

Yevgeniy Voloshin escribió:
> Hi Group,
>
> I have a problem with boot on M7i after upgrade JunOS:
>  request system software validate /var/tmp/jinstall-
> 8.1R3.3-export-signed.tgz
>  request system software add /var/tmp/jinstall-8.1R3.3-export-signed.tgzreboot
>
> JunOS validation was OK, and after the reboot it didn't come up. Console
> messages show cyclic reboot by watchdog timeout.
> Only this console port connection is available. How to recover this under
> such a constraints?
>
> No /kernel
>   
>>> FreeBSD/i386 BOOT
>>>       
> Default: 0:ad(0,a)/kernel
> boot: H
>
>
>
> Award Modular BIOS v4.51PG, An Energy Star Ally
> Copyright (C) 1984-98, Award Software, Inc.
>
> BIOS Version 1.8
> 09/18/2003-i440BX-SMC67X-2A69TU00C-00
>
>
> WARNING: History show a reset caused by the WatchDog
> Will try to boot from :
> PCMCIA ATA Flash Card
> Compact Flash
> Primary IDE Hard Disk
> Ethernet
>
> Trying to Boot from Ethernet
>
> Intel UNDI, PXE-2.0 (build 078)
> Copyright (C) 1997,1998,1999 Intel Corporation
> PXE-E61: Media test failure, check cable
> PXE-M0F: Exiting Intel PXE ROM.
>
> Trying to Boot from PCMCIA ATA Flash Card
> Trying to Boot from Compact Flash
>
> Trying to Boot from Primary IDE Hard Disk
> Loading /boot/loader
> No /boot/loader, next boot from alternate path
> Loading /cf/boot/loader
> No /cf/boot/loader
>   
>>> FreeBSD/i386 BOOT
>>>       
> Default: 0:ad(0,a)/kernel
> boot: ;1R
>
>
> TIA!
> ---
> Yev.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
>
>