[j-nsp] L2circuit local-switching

[sthaug at nethelp.no]

> doesnt work:
> 
> Connection/Circuit Type St Time last up     # Up trans
> test   if-sw       Dn      -----       0
>   ae0.28                            intf  NP
>   ge-1/1/0.3                        intf  NP
> 
> jonas at ffm3-edge# show protocols connections 
> interface-switch test {
>     interface ae0.28;
>     interface ge-1/1/0.3;
> }
> 
> Still hardware not present...do you need a special encapsulation or is
> there any hardware limitation? (Do you need to use VLAN's with ids >512
> because of vlan-ccc?)

Same limitations as vlan-ccc - so you need VLAN id >= 512 unless you have
IQ PIC or modern SFP-based PIC.

We use l2circuit local-switching quite a bit, works for us. Never tried
with an aggreated interface though.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no