[j-nsp] Line modules

[Chris Kawchuk]

Yes, most of the modules are supported in both the ERX-310 and the
ERX-1440.

Check the detailed ERX Module guide to see which specific MODs/IOAs that
are supported in both platforms at
http://www.juniper.net/techpubs/hardware/erx/junose82/hw-erx-module/nofr
ames-collapsedTOC.html

PDF version:

http://www.juniper.net/techpubs/hardware/erx/junose82/bookpdfs/hw-erx-mo
dule.pdf

Cheers.

- Chris.

____________________________________
Chris Kawchuk (ckawchuk at juniper.net)
Systems Engineering, Service Providers
Juniper Networks Inc., Canada
local:     +1 (403) 470-8174
toll-free: +1 (866) 470-8174


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of M.Mihailidis
Sent: Thursday, November 01, 2007 2:19 AM
To: Juniper-Nsp
Subject: [j-nsp] Line modules

hello all 

i was wondering can i install a line module from a erx-1440 to a
erx-310?
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp