[j-nsp] L2 VPNs configuration

[GAY Samuel]

> I've tried to use unit 1024 (as it fits in the range described) and 
> when I do a commit check I get the following error:
>
> root at pe-1# commit check
> [edit interfaces ge-0/0/1]
>  'unit 1024'
>    Only unit 0 is valid for this encapsulation
> error: configuration check-out failed

You are right. With encapsulation "ethernet-ccc" you have to use unit 0. 
You have to use unit from 512 to 4095 with encapsulation "vlan-ccc".
Sorry about it.
> Regarding the Route Distinguisher, I thought that it must be the same 
> on both CEs so that they'll know it's traffic destined for a given 
> routing instance.
The route-distinguisher must be different on each PE. A PE know where it 
must send traffic with this command :

vrf-target target:65102:100;

Regards,
Samuel

-------------- next part --------------
A non-text attachment was scrubbed...
Name: samuel.gay.vcf
Type: text/x-vcard
Size: 318 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/juniper-nsp/attachments/20071109/348007d0/attachment.vcf