[j-nsp] J6350's interface down/up

[sthaug at nethelp.no]

> > check out clause 37 in auto-negotiation IEEE802 standard, you will
> > need to explicitly set the speed and duplex settings. Auto-negotiation
> > works for cisco to cisco and on occasions to HP procufve, far too often
> > the auto-negotiation fails with other vendors.
> 
> Personally, I have for the most part (various equipment) found that 
> auto-neg works fine although I know that a lot of people will say to 
> nail both ends to 100/full.

Agreed. We nowadays use auto-neg for most things. The situation is quite
different from, say 5 years ago, where we tended to nail both ends.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no