[j-nsp] JUNOSe Cross-LM LACP?

[Sven Juergensen (KielNET)]

Hi list,

the JUNOSe 8.1 documentation at
http://tinyurl.com/2aclxy
section "Configuring Ethernet
Interfaces" states:

"To create the links in the LAG bundles, you can add one or more
Ethernet physical interfaces to it. The LACP detects Ethernet interfaces
as links if they are configured on the same line module and have the
same physical layer characteristics. The LACP also assigns to the LAG
bundle the same MAC address of the Ethernet link with the highest port
priority, which is the lowest value."

Does this mean that i can use the
transceiver of two ERX-GIGESFP-IOAs
each to create a 2GBps Full Duplex LAG?

Thanks and best regards,

sven03

-- 
Mit freundlichen Gruessen

i. A. Sven Juergensen

Fachbereich
Informationstechnologie

KielNET GmbH
Gesellschaft fuer Kommunikation
Preusserstr. 1-9, 24105 Kiel

Telefon : 0431 / 2219-053
Telefax : 0431 / 2219-005
E-Mail  : s.juergensen at kielnet.de
Internet: http://www.kielnet.de

AS# 25295
Key fingerprint:
65B6 90FC 010A 39CE DCA5  336D 9C45 3B7A B02D E132

Geschaeftsfuehrer Eberhard Schmidt
HRB 4499 (Amtsgericht Kiel)