[j-nsp] JUNOSe Cross-LM LACP?

[Rafał Szarecki]

Sven,

All memeber of LAG has to be on same Line Module. Line module is front card
- this wihtout interfaces. In exception of E320 and E120, LM has 1:1
relationship to LM. So, members of LAG has to be on single IOA.

For E320 and E120, LM can host two half-high IOA. Then LAG can span between
this two IOA, but not between LMs.

in other words, slot number in memeber-link name has to be same for all LAG
memebers.


2007/9/4, Sven Juergensen (KielNET) <s.juergensen at kielnet.de>:
>
> Hi list,
>
> the JUNOSe 8.1 documentation at
> http://tinyurl.com/2aclxy
> section "Configuring Ethernet
> Interfaces" states:
>
> "To create the links in the LAG bundles, you can add one or more
> Ethernet physical interfaces to it. The LACP detects Ethernet interfaces
> as links if they are configured on the same line module and have the
> same physical layer characteristics. The LACP also assigns to the LAG
> bundle the same MAC address of the Ethernet link with the highest port
> priority, which is the lowest value."
>
> Does this mean that i can use the
> transceiver of two ERX-GIGESFP-IOAs
> each to create a 2GBps Full Duplex LAG?
>
> Thanks and best regards,
>
> sven03
>
> --
> Mit freundlichen Gruessen
>
> i. A. Sven Juergensen
>
> Fachbereich
> Informationstechnologie
>
> KielNET GmbH
> Gesellschaft fuer Kommunikation
> Preusserstr. 1-9, 24105 Kiel
>
> Telefon : 0431 / 2219-053
> Telefax : 0431 / 2219-005
> E-Mail  : s.juergensen at kielnet.de
> Internet: http://www.kielnet.de
>
> AS# 25295
> Key fingerprint:
> 65B6 90FC 010A 39CE DCA5  336D 9C45 3B7A B02D E132
>
> Geschaeftsfuehrer Eberhard Schmidt
> HRB 4499 (Amtsgericht Kiel)
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
Rafał Szarecki JNCIE-M/T, JNCIP-E
+48602418971