[j-nsp] monitor

[Erdem Sener]

typo:

'monitor traffic interface a/b/c' or 'monitor traffic interface
a/b/c.x' command.

Sorry for multiple emails,
Erdem

On 9/5/07, Erdem Sener <erdems at gmail.com> wrote:
> Hi,
>  If you are pinging _from the router_, you should be able to see your
> icmp traffic with 'monitor traffic a/b/c.x' command.
>
>  If rip updates are all you see, I'd say you're using another egress
> interface than ge-0/0/1 for your destination.
>
>  You may check this with show route x.x.x.x and see your next-hop.
>
>  Hope this helps,
>  Erdem
>
> On 9/5/07, M.Mihailidis <mixalism at gmail.com> wrote:
> > hello guys i want to monitor  a interface to see what source address it is using when i try to ping  a certain address
> > i used "monitor traffic interface ge-0/0/1 extensive"
> > and all i got was the rip routing updates as output.
> > any suggestions?
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>