[j-nsp] Setting PE-4FE-TX port to 10m gives 'Illegal media change: invalid speed'

[Erdem Sener]

Hi,

What's your platform and JUNOS?

Erdem

On 9/5/07, Ras <jeekay at gmail.com> wrote:
> I've just tried to set a port on an PE-4FE-TX to 10m (set interfaces
> fe-0/0/1 speed 10m). This works fine on our PE-12FE-TX and the 'commit
> check' says all is well, but when I commit I get:
>
> /kernel: %KERN-2: fe-0/0/1: Illegal media change: invalid speed
>
> Are these 100m only ports? If not, what else might be wrong?
>
> Thanks,
> Ras
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>