[j-nsp] Per packet load balancing

[Leigh Porter]

On a similar note, does anybody know if Junipers will be any good at 
load balancing multiple GRE tunnels between two devices?

--
Leigh




David Ball wrote:
>   The following URL may help to explain:
>
> http://juniper.cluepon.net/index.php/Load_Balancing
>
>   as would the official JUNOS doc on the matter:
>
> http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-routing/id-10480125.html
>
>    As for workarounds, sounds like getting the Internet Processor I
> ASIC would be the only way (and I can't help but think that such a
> move would be generally discouraged).
>
> NB: the first site is neither affiliated nor endorsed by Juniper
> Networks..but contains good info.
>
> David
>
>
> On 20/09/2007, Nick Kraal <nick at arc.net.my> wrote:
>   
>> Dear all,
>>
>> As I understand it, Juniper routers do not support per packet load
>> balancing on multiple interfaces similar to Cisco, and only in a per
>> flow fashion.
>>
>> Is there is any workaround for this?
>>
>> Regards,
>>
>> -nick/
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>>     
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>