[j-nsp] Load Balance b/w two or more LSPs

[Ariff Premji]

Farhan,
Not knowing much about the traffic or the number of VPNs, a couple of  
things you can try without  the multi-link feature set:

forwarding-options {
     hash-key {
         family inet {
             layer-3;
             layer-4;
         }
         family mpls {
             label-1;
             label-2;
             payload {
                 ip;
             }
         }
     }
}

policy-options {
     policy-statement LOAD-BALANCE {
         term t1 {
             then {
                 load-balance per-packet;
             }
         }
     }
}
routing-options {
     forwarding-table {
         export LOAD-BALANCE;
     }
}

-A

On Sep 25, 2007, at 11:28 AM, Farhan Jaffer wrote:

> Hi,
>
> I am doing in house testing of MPLS based L2 VPN, but stuck at this
> position. While i doing load balancing b/w two LSPs, it's not working.
>
> Let me explain the scenaio:
> Two Routers (M7i & J6350) back to back connected with 2 E1s. I  
> establish
> one
> LSP with one E1 & the other with another. Uneven load balancing is
> configured by entering 'loadbalance bandwidth' command under [edit
> protocols
> rsvp] & the other stuff necessary to establish L2 VPN.
>
> Now whenever the traffic comes from side A to side B or vice versa, it
> selects randomly only one LSP for the traffic to flow, rather load
> balance
> b/w two LSPs. I also enabled 'least-filled' command under LSP config,
> but no
> result.
>
> Pls note that ASM is not integrated with M7i.
>
> Any idea OR any other solution?
>
> Many thanks in advance.
>
> Regards
> -FJ
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp