[j-nsp] Juniper EX

[Jonathan Crawford]

Nope, only virtual* present is the virtual-chassis config.

jj at ex4200-test# edit virt?
Possible completions:
> virtual-chassis      Virtual chassis configuration

Under this version of JUNOS virtual routers live under routing-instances as instance-type virtual-router.


-Jonathan

-----Original Message-----
From: Olaf Baumert - JNSP [mailto:juniper at baumert.cc]
Sent: Tuesday, April 15, 2008 4:22 PM
To: Jonathan Crawford
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Juniper EX

On Tue, 15 Apr 2008 15:38:08 -0700, Jonathan Crawford <jj at powerset.com> wrote:
Hi,

> It has this nice error in the config block when you add it...
> jj at ex4200-test> show configuration routing-instances

what about virtual-routers?
IIRC the ERX considers Layer1-Layer2 to the "context" default and
Layer-3 and above to the context/virtual-router where it was configured.

#sh config virt-ro default interface giga 0/0
interface gigabitEthernet 0/0
 mtu 2000
 duplex full
 load-interval 30
 encapsulation vlan
interface gigabitEthernet 0/0.101
 vlan id 101
interface gigabitEthernet 0/0.102
 vlan id 102

#sh config virtual-ro test interface giga 0/0
interface gigabitEthernet 0/0.101
 ip address 10.0.2.6 255.255.255.248

#sh config virtual-ro prov interface giga 0/0
interface gigabitEthernet 0/0.102
 ip address 172.24.2.1 255.255.255.248


best regards,

Olaf