[j-nsp] Juniper EX

[Olaf Baumert - JNSP]

On Tue, 15 Apr 2008 15:38:08 -0700, Jonathan Crawford <jj at powerset.com> wrote:
Hi,

> It has this nice error in the config block when you add it...
> jj at ex4200-test> show configuration routing-instances

what about virtual-routers?
IIRC the ERX considers Layer1-Layer2 to the "context" default and
Layer-3 and above to the context/virtual-router where it was configured.

#sh config virt-ro default interface giga 0/0
interface gigabitEthernet 0/0
 mtu 2000
 duplex full
 load-interval 30
 encapsulation vlan
interface gigabitEthernet 0/0.101
 vlan id 101
interface gigabitEthernet 0/0.102
 vlan id 102

#sh config virtual-ro test interface giga 0/0
interface gigabitEthernet 0/0.101
 ip address 10.0.2.6 255.255.255.248

#sh config virtual-ro prov interface giga 0/0
interface gigabitEthernet 0/0.102
 ip address 172.24.2.1 255.255.255.248


best regards,

Olaf