[j-nsp] MPLS, RSVP and strict path

[samuel.gay at bt.com]

> Look at the ERO using trace-options or show rsvp session. 

Unfortunetely I can't change the configuration for it.
About the command "show rsvp session" I don't see ERO information.

This is my "problem" in detail.
In fact I am doing some migrations to install a new Juniper router. During a short period the routers (old and new one) are beside and when the migration is finished I power off the old one. 
To put this new router in the network I use a new loopback address. I need to know the stricts LSPs going through the old router, to configure the new loopback on the ingress routers (if loopback is used in the path).
Currently I use the command "show mpls lsp transit" to know which LSPs are in transit and after I go on each router where come from the LSPs to know if a strict path with the old loopback is configured. I would like to find a way to simplify this.

Thanks,
Samuel



-----Message d'origine-----
De : Doug Marschke [mailto:Doug at ietraining.net] 
Envoyé : lundi 21 avril 2008 20:08
À : Gay,S,Samuel,JPECS R; juniper-nsp at puck.nether.net
Objet : RE: [j-nsp] MPLS, RSVP and strict path

Look at the ERO using trace-options or show rsvp session. 


Doug Marschke
Principal Technologist
Strategic Networks Training
JNCIE-ER #3, JNCIE-M/T #41, JNCIS-FW, JNCI www.ietraining.net
(415)902-5702


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of samuel.gay at bt.com
Sent: Monday, April 21, 2008 2:31 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] MPLS, RSVP and strict path

Hi Group,
 
Do you know a easy way to see if a LSP going through a transit router is configured with a strict path ?
 
Thanks for your help,
Samuel
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp