[j-nsp] Juniper High CPU Process Kqread

[David Ball]

  Are you performing the trace from a Windows box?  It will use ICMP
by default for a traceroute instead of UDP.  If on a UNIX box, you
should be able to use -I or similar to tell it to use ICMP as well.
That might be one option to look at.

David


On 15/08/2008, a. rahman isnaini rst / netsoft <risnaini at netsoft.net.id> wrote:
> Hi,
>
>
> Why there's always lost while tracing the route to destination at
> Juniper Hop (6).
> But not happening on Cisco Hops (5/7)
> Ping result no loss at all.
>
> 5     8 ms     1 ms     1 ms  202.1.31.130
> 6     *       33 ms     *     121.100.4.1
> 7    14 ms    20 ms    13 ms  121.100.5.1
>
>
> Any suggestion would be greatly appreciated..
> I've done defined filter which allocated a certain of enough capacity
> for protocol icmp.
>
> rgs
> a. rahman isnaini r.sutan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>