[j-nsp] Juniper High CPU Process Kqread

a. rahman isnaini rst / netsoft risnaini at netsoft.net.id
Sat Aug 16 05:59:18 EDT 2008


Hallo David,


Yes windows box, not yet from unix box.
Anyway Cisco using the similar UDP for traceroute, isn't it.. ?

David Ball wrote:
>   Are you performing the trace from a Windows box?  It will use ICMP
> by default for a traceroute instead of UDP.  If on a UNIX box, you
> should be able to use -I or similar to tell it to use ICMP as well.
> That might be one option to look at.
> 
> David
> 
> 
> On 15/08/2008, a. rahman isnaini rst / netsoft <risnaini at netsoft.net.id> wrote:
>> Hi,
>>
>>
>> Why there's always lost while tracing the route to destination at
>> Juniper Hop (6).
>> But not happening on Cisco Hops (5/7)
>> Ping result no loss at all.
>>
>> 5     8 ms     1 ms     1 ms  202.1.31.130
>> 6     *       33 ms     *     121.100.4.1
>> 7    14 ms    20 ms    13 ms  121.100.5.1
>>
>>
>> Any suggestion would be greatly appreciated..
>> I've done defined filter which allocated a certain of enough capacity
>> for protocol icmp.
>>
>> rgs
>> a. rahman isnaini r.sutan
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
> 
> 
> 


More information about the juniper-nsp mailing list