[j-nsp] General MX notes for use as a core ethernet switch...

[Alexandre Snarskii]

On Mon, Aug 18, 2008 at 11:33:25PM -0300, Rubens Kuhl Jr. wrote:
> > 3) To be 100% compatible with Cisco's PVST+, you need to use "force-version"
> > and make sure you are configured for STP and not rapid-pvst...
> 
> Any references whether this is the case with EX-series ?

Interoperability between EX-series and Cisco PVST+ described in detail here: 

http://www.juniper.net/techpubs/en_US/junos9.1/information-products/topic-collections/ex-series/implementation-guide/spanning-trees-ex-series.pdf

-- 
Alexandre Snarskii

If you ask a stupid question, you may feel stupid. 
If you don't ask a stupid question, you remain stupid.
                                       -Tony Rothman, Ph.D.U. Chicago, Physics