[j-nsp] per-packet load balancing over multiple l2tp tunnels

[Dave Kruger]

Hi All

Has anyone ever tried to do change the load balancing technique over
l2tp tunnels on an ERX?

the default is obviously per-flow:

sh ip interface tun l2tp:139254/1105340/1016347 | i Multipath
  Multipath mode = hashed

It seems enabling per-packet on the physical interface over which the
l2tp tunnel terminates, with the command "ip multipath round-robin" has
no effect:

sh ip int FastEthernet4/3.302 | i Multipa
  Multipath mode = round-robin

And I see no place to do this under the l2tp destination profile or the
profile it references

thanks for your time and any feedback

Regards,
Dave