[j-nsp] Traffic Logging

[Ricardo Tavares]

Try something like:

=================================================
set system syslog file Special-Events daemon info
set system syslog file Special-Events match "(.*EVENT
UpDown.*->.*)|(.*bgp.*)|(.*LDP.*)|(.*OSPF.*);"
=================================================

so you can do:

show log Special-Events

or

monitor start Special-Events

Regards,
Ricardo

On Mon, Dec 1, 2008 at 8:46 PM, a. rahman isnaini rst / netsoft <
risnaini at netsoft.net.id> wrote:

> Hi,
>
>
> To generate log like cisco "sh logging" using access-list, i have
> configured :
> - Firewall>Family Inet>Filter "log">Match all then log
> - Interface>Unit x> Family Inet> input filter "log"
> - System>Services>Syslog>all facilities [any]
>
> All I've seen by "show log messages" is just simply standard log (somebody
> is login, etc..).
> And as well, "show firewall log", it match the "log" but only shows Point
> to Point session.
>
> Any simple way to have log such cisco did ? please kindly advice.
>
> rgs
> a. r.isnaini rangkayo sutan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
__________________________________________
Vai Encarar? http://www.vaiencarar.com.br