[j-nsp] Traffic Logging

[a. rahman isnaini rst / netsoft]

No luck, Ricardo :(

Ricardo Tavares wrote:
> Try something like:
> 
> =================================================
> set system syslog file Special-Events daemon info
> set system syslog file Special-Events match "(.*EVENT 
> UpDown.*->.*)|(.*bgp.*)|(.*LDP.*)|(.*OSPF.*);"
> =================================================
> 
> so you can do:
> 
> show log Special-Events
> 
> or
> 
> monitor start Special-Events
> 
> Regards,
> Ricardo
> 
> On Mon, Dec 1, 2008 at 8:46 PM, a. rahman isnaini rst / netsoft 
> <risnaini at netsoft.net.id <mailto:risnaini at netsoft.net.id>> wrote:
> 
>     Hi,
> 
> 
>     To generate log like cisco "sh logging" using access-list, i have
>     configured :
>     - Firewall>Family Inet>Filter "log">Match all then log
>     - Interface>Unit x> Family Inet> input filter "log"
>     - System>Services>Syslog>all facilities [any]
> 
>     All I've seen by "show log messages" is just simply standard log
>     (somebody is login, etc..).
>     And as well, "show firewall log", it match the "log" but only shows
>     Point to Point session.
> 
>     Any simple way to have log such cisco did ? please kindly advice.
> 
>     rgs
>     a. r.isnaini rangkayo sutan
>     _______________________________________________
>     juniper-nsp mailing list juniper-nsp at puck.nether.net
>     <mailto:juniper-nsp at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 
> 
> 
> -- 
> __________________________________________
> Vai Encarar? http://www.vaiencarar.com.br
> 
> 
> ------------------------------------------------------------------------
> 
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition. 
> Version: 7.5.516 / Virus Database: 269.17.2/1187 - Release Date: 12/16/2007 11:36 AM