[j-nsp] RAM for J2300

Jared Mauch jared at puck.nether.net
Tue Dec 16 10:15:12 EST 2008


On Dec 15, 2008, at 10:56 PM, Peter E. Fry wrote:

> On 16 Dec 2008 at 12:24, Tom Storey wrote:
> [...]
>> Can anyone confirm if DDR400 will work with a J2300? I understand  
>> this is
>> able to fall back to DDR266.
>
>  Yep, that's just the spec.  The clock is supplied by the chipset.
> If I'd planned ahead I would have used the memory I pulled from my
> SSG 550 in my J2300, but I'd already purchased more (identical sticks
> from Crucial).  It's DDR (i.e. DDR1), non-ECC.  If you use a memory
> selector, just choose an Intel 845G motherboard.  I prefer Crucial as
> Juniper uses Micron sticks, but that's just paranoia.
>  Theoretically the chipset will support >1GB, but I haven't tried
> more in the J2300.  While the forwarding process sucks up a
> tremendous amount or RAM, I doubt >1GB (to achieve >512MB free when
> idle/unconfigured) would buy you much.

	The J2300 can use 2G of ram.

	- Jared



More information about the juniper-nsp mailing list