[j-nsp] dymanic interfaces junose

[SunnyDay]

Hello
In junose ihave this configuration on an interface:

i/nterface gigabitEthernet 1/0/1
 shutdown
 mtu 1522
 encapsulation vlan
 vlan bulk-config "test"
 profile vlan bulk-config "test" "test pro"
 vlan bulk-config "test" vlan-range 567 667

/my problem is that the interface is shutdown but i still have vlan 
subinterface,pppoe interface and ppp in down state
and i cannot remove the "/vlan bulk-config "test" vlan-range 567 667" 
/from the interface because it says:/dynamic interface exists

any ideas?
/