[j-nsp] dymanic interfaces junose

[Junaid]

Hi,

Try shutting down the vlan-range with something like the following statement:

(config-if)#vlan bulk-config test shutdown vlan-range 567 667

also see:
http://www.juniper.net/techpubs/software/erx/junose73/swconfig-link/html/dynamic-interfaces-bulk-config6.html

Regards,
Junaid


On Fri, Jan 18, 2008 at 5:10 PM, SunnyDay <cscosunny at gmail.com> wrote:
> Hello
> In junose ihave this configuration on an interface:
>
> i/nterface gigabitEthernet 1/0/1
> shutdown
> mtu 1522
> encapsulation vlan
> vlan bulk-config "test"
> profile vlan bulk-config "test" "test pro"
> vlan bulk-config "test" vlan-range 567 667
>
> /my problem is that the interface is shutdown but i still have vlan
> subinterface,pppoe interface and ppp in down state
> and i cannot remove the "/vlan bulk-config "test" vlan-range 567 667" /from
> the interface because it says:/dynamic interface exists
>
> any ideas?
> /
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>