[j-nsp] M7i to Extreme BD6808

[Dusan Avbreht]

Check ethertype on BD and Juniper!!! - default value is usually different
!!!

Dusan

On Tue, Jan 29, 2008 at 1:17 AM, John T. Yocum <john at fluidhosting.com>
wrote:

> Hello,
>
> Got a strange problem. I'm trying to setup an aggregated ethernet
> connection between a PE-4FE-TX and an Extreme BD6808 with F48Ti.
>
> I've tried both both straight through and cross-over cables but I can't
> get a link-light on either side. As well, neither of them log an event
> of a connection error.
>
> Anyone else had any trouble getting them to connect, or have any advice?
> And, yes I did check, the ports are enabled on both sides.
>
> Thanks,
> John
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>