[j-nsp] LSP for RPF-Check into inet.2?

[oliver.kupke at cbc.de]

Hi folks,

i am just wondering if it is possible to put lsp`s into inet.2 for the rpf-check.
Main focus is to use to unequal paths to a destination, so that source1 sends traffic path1 and source2 uses path2.
The issue is in a ring topology with multiple hops in between source and drain so statics might give me a little headache.

Maybe someone has done this and could give me some hints?

Regards and a nice weekend,


Oliver Kupke
Dipl.-Ing. (FH)
Systems & Technology / Netzservice

CBC Cologne Broadcasting Center GmbH
Aachener Straße 1044
D- 50858 Köln / Germany
Phone: +49 (0)221- 456 1544
Fax: +49 (0)221- 456 900 1544
Mailto:oliver.kupke at rtl.de<mailto:oliver.kupke at rtl.de>
www.cbc.de