[j-nsp] Help with OSPF config

[Matthew Crocker]

I need some Juniper-Foo for my OSPF config.

  I have 3 routers connected to a GigE switch.

Router A is a Cisco 12000
Router B is a Juniper J6350
Router C is a Redback SE-400

I have A&C talking OSPF and sharing routes just fine.

I have A&B  & C&B complaining about what the Juniper is sending out  
and shutting it down.

Router B config is

# show protocols ospf
export export-statics;
area 0.0.0.0 {
     authentication-type md5;
     interface ge-0/0/0.0 {
         authentication {
             md5 1 key "$XXXXXXXXXXXXXXXXX"; ## SECRET-DATA
         }
     }
}

Router A config is
interface GigabitEthernet4/1
  description Link to CORE-SW-A-Fe-0-1
  ip address 1.2.3.4 255.255.255.128
  no ip directed-broadcast
  ip ospf authentication message-digest
  ip ospf authentication-key 7 XXXXXXXXXXXXXXX
  ip ospf message-digest-key 1 md5 7 XXXXXXXXXXXXX
  no negotiation auto

router ospf 1
  router-id 204.97.12.4
  log-adjacency-changes
  nsf
  area 0 authentication message-digest
  redistribute connected subnets
  redistribute static subnets
  network 1.2.3.0 0.0.0.255 area 0