[j-nsp] Bulk config migration between interfaces?

[Jonathan Brashear]

I have a facility(3, actually) I'm upgrading and part of this upgrade
involves moving a circuit from one PIC on a M20 FPC to a new PIC on the
same FPC.  I have a few dozen VLANs that will be migrated as well.
Obviously I could do this one by one, but I was curious if anyone knew a
way within JunOS that I could move all the logical configuration from
one physical interface to another.  It would save me a significant
amount of time.

Network Engineer
> 214-981-1954 (office) 
> 214-642-4075 (cell)
> jbrashear at hq.speakeasy.net 
http://www.speakeasy.net