[j-nsp] Bulk config migration between interfaces?

[kura at iij.ad.jp]

Hello,

I think 'rename' command in configuration mode will match for your case.

ex.# rename interfaces ge-0/0/0 to ge-0/1/0

Regards,
-- 
Tomohiko Kurahashi <kura at iij.ad.jp>
Internet Initiative Japan Inc.


From: jbrashear at hq.speakeasy.net
Date: Wed Feb 20 2008 07:14:58 JST
>
> I have a facility(3, actually) I'm upgrading and part of this upgrade
> involves moving a circuit from one PIC on a M20 FPC to a new PIC on the
> same FPC.  I have a few dozen VLANs that will be migrated as well.
> Obviously I could do this one by one, but I was curious if anyone knew a
> way within JunOS that I could move all the logical configuration from
> one physical interface to another.  It would save me a significant
> amount of time.
> 
> Network Engineer
> > 214-981-1954 (office) 
> > 214-642-4075 (cell)
> > jbrashear at hq.speakeasy.net 
> http://www.speakeasy.net
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp