[j-nsp] How to load a lot of prefixes

[Stefan Fouant]

If you can get a full route table from someone you can play it back to your
routers in your testbed by using RouteM.

HTH.

Stefan Fouant
On Feb 20, 2008 12:03 PM, wang dong bei <wang.dong.bei at gmail.com> wrote:

> Hi talented minds,
>
> I want to do some testing with BGP and I need to inject a lots of routes,
> preferably the entire Internet routing table, into some of the routers of
> an
> isolated lab. My initial approach is to capture the "show route bgp"
> output
> from one of my routers and massage the data into the "set routing-options
> static prefix....." and load everything into my testing routers. However,
> the script is more difficult to write, the result is full of errors, and
> when I load the config, it somehow hang my terminal sessions.
>
> So are there anyways to quickly populate the routing table of my testing
> routers by administrative configuration means?
>
> thanks for your help.
>
> regards,
>
> dong bei
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>