[j-nsp] lcp timeout for junose?

[Sven Juergensen (KielNET)]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi list,

if a pppoe-session gets terminated by a
power outage, a pulled plug or something
other that goes along with physical
interaction of e.g. the modem, the junos
docs tell that the ppp keepalive notices
this after 90-120s and terminates the
session.

even when setting the keepalive to the
minimum of one second, this still keeps
the session up in the box and due to
duplicate address checks, consecutive
authentications fail until the threshold
is reached, the session gets terminated
and the new session is up.

deactivating the duplicate address checks
results in a dual session which, even
after the first one times out, apparently
can't route any traffic.

is there a knob where this can be tweaked
further? screenos does this with
"lcp-echo-retries" and it works quite well.
does junose provide something similar with
me failing to scrounge it up from the
documentation?

thanks and best regards,

sven03

Mit freundlichen Gruessen

i. A. Sven Juergensen

- --
Fachbereich
Informationstechnologie

KielNET GmbH
Gesellschaft fuer Kommunikation
Preusserstr. 1-9, 24105 Kiel

Telefon : 0431 / 2219-053
Telefax : 0431 / 2219-005
E-Mail  : s.juergensen at kielnet.de
Internet: http://www.kielnet.de

AS# 25295

Key fingerprint:
65B6 90FC 010A 39CE DCA5  336D 9C45 3B7A B02D E132

"221 2.7.0 Error: I can break rules, too. Goodbye."

Geschaeftsfuehrer Eberhard Schmidt
HRB 4499 (Amtsgericht Kiel)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.7 (GNU/Linux)

iD8DBQFHwrnLnEU7erAt4TIRApwJAKDu2rbGAqMfaix/45rwx/HcYRlVjgCffXnH
fcMpD/Z7tJF4Zw4P8Fxnsw8=
=w/vf
-----END PGP SIGNATURE-----