[j-nsp] Juniper and ACS

[Erdem Sener]

Hey Ovais,

 You're missing the 'template' user, as described in the following urls:

http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-system-basics/id-10615692.html#id-10615692
http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-system-basics/id-10674699.html#id-10674699

HTH,
Erdem

On Mon, Feb 25, 2008 at 10:58 AM, Ovais Iqbal <ovais.iqball at yahoo.com> wrote:
> Hi all, I am using junos 7.5 and cisco ACS 3.3.
>
>   I want to authenticate users using Radius juniper in cisco ACS. but i want to ask that is it necassary to configure local user accounts to make authentication successfull ??
>
>   This is my configuration
>
>   authentication-order [ radius ];
>   radius-server {
>   10.1.1.23 {
>   secret "$9$L.QN-wYgoGjqM8aZ"; ## SECRET-DATA
>   source-address 10.1.12.7;
>   }
>
>   but if i am only using this configuration authentication is not successful,
>   if i add these commands
>   login {
>   user ovais {
>   full-name OIqbal;
>   uid 2001;
>   class super-user;
>   authentication {
>   encrypted-password "$1$I.YS0Q0h$tTgJT8l8xCUNNbtXB3rmw0"; ## SECRET-D
>   ATA
>   Then it just authenticates the user with login name OIqbal and no other users, can any1 tell me why is it necassary to configure local user accounts
>
>
>
>  ---------------------------------
>  Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.
>  _______________________________________________
>  juniper-nsp mailing list juniper-nsp at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/juniper-nsp
>