[j-nsp] Lac Lns

[ZhangHong]

did you do the log sev debug l2tp and ppp to see what happens?
or maybe it is the mru that affects, you can try  this profile:

> profile "L2TP-Generic"
> ip unnumbered loopback 10
> ppp authentication pap chap
> ppp mru 1442
> ppp log pppPacket
> ppp log pppStateMachine

the last two line is for PPP debug.



----- Original Message ----- 
From: "M.Mihailidis" <mixalism at gmail.com>
To: "Juniper-Nsp" <juniper-nsp at puck.nether.net>
Sent: Wednesday, February 27, 2008 10:39 PM
Subject: [j-nsp] Lac Lns


> Hello 
> i have an issue getting up the tunnel from the Lac to Lns
> any help welcome
> 
> the configuration is:
> 
> aaa domain-map "mlppp.com"
> router-name default
> ipv6-router-name default
> tunnel 1 
>  address "10.10.10.1"
>  source-address "10.10.10.2"
>  password 12345
> 
> profile "L2TP-Generic"
> ip unnumbered loopback 10
> ip sa-validate
> ip ignore-df-bit
> ppp authentication pap chap
> ppp multilink enable
> pppoe remote-circuit-id
> 
> tunnel-server 2/2/0
> max-interfaces all-available
> 
> 
> interface loopback 40
> ip address 10.10.10.2 255.255.255.255
> 
> 
> l2tp destination profile "Lac" virtual-router VR1 ip address 0.0.0.0
> remote host default
>  tunnel password 12345
>  profile "L2TP-Generic"
>  local ip address 10.10.10.1
> 
> 
> and the loopback of VR1
> 
> interface loopback 10 
> ip address 10.10.10.1 255.255.255.25
> 
> 
> 
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp