[j-nsp] Lac Lns

[Nitin Vig]

Are you testing lac and lns on the same box? That is not supported.

If not, then try logging at debug level for l2tp, l2tpstatemachine,
ppppacket and aaaUserAccess. They might give a clue.

Regards,
Nitin 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of M.Mihailidis
Sent: Wednesday, February 27, 2008 8:10 PM
To: Juniper-Nsp
Subject: [j-nsp] Lac Lns

Hello 
i have an issue getting up the tunnel from the Lac to Lns
any help welcome

the configuration is:

aaa domain-map "mlppp.com"
 router-name default
 ipv6-router-name default
 tunnel 1 
  address "10.10.10.1"
  source-address "10.10.10.2"
  password 12345

profile "L2TP-Generic"
 ip unnumbered loopback 10
 ip sa-validate
 ip ignore-df-bit
 ppp authentication pap chap
 ppp multilink enable
 pppoe remote-circuit-id

tunnel-server 2/2/0
 max-interfaces all-available


interface loopback 40
 ip address 10.10.10.2 255.255.255.255


l2tp destination profile "Lac" virtual-router VR1 ip address 0.0.0.0
 remote host default
  tunnel password 12345
  profile "L2TP-Generic"
  local ip address 10.10.10.1


and the loopback of VR1

interface loopback 10 
ip address 10.10.10.1 255.255.255.25






_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp