[j-nsp] Juniper - Cisco Catalyst Fast Ether Channel Load Balancing

[David Ball]

  Take a look at the [edit forwarding-options] section, specifically
the 'hash-key' section for multiservice if you're just doing L2 across
the bundle:

http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-policy/id-10568390.html

David



On 28/01/2008, a. r.isnaini. rangkayo sutan <risnaini at netsoft.net.id> wrote:
> Hi,
>
> Any suggestion will be very appreciated.
>
> Here's the scheme :
> Ports aggregation with trunking was success between Juniper - Cisco
> Catalyst, but i'm having problem with the load that is not balanced on
> each port.
>
> It might be the config still missing one line somewhere :)
>
> interfaces {
>      fe-0/2/0 {
>          fastether-options {
>              802.3ad ae1;
>          }
>      }
>      fe-0/2/1 {
>          fastether-options {
>              802.3ad ae1;
>          }
>      }
>
>      ae1 {
>          description FAST-ETHER-CHANNEL-2FE-AGGREGATED;
>          vlan-tagging;
>          aggregated-ether-options {
>              minimum-links 2;
>              link-speed 100m;
>
> - a. r. i. rangkayo sutan
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>