[j-nsp] Juniper - Cisco Catalyst Fast Ether Channel Load Balancing

[a. r.isnaini. rangkayo sutan]

Hi,

Any suggestion will be very appreciated.

Here's the scheme :
Ports aggregation with trunking was success between Juniper - Cisco
Catalyst, but i'm having problem with the load that is not balanced on
each port.

It might be the config still missing one line somewhere :)

interfaces {
     fe-0/2/0 {
         fastether-options {
             802.3ad ae1;
         }
     }
     fe-0/2/1 {
         fastether-options {
             802.3ad ae1;
         }
     }

     ae1 {
         description FAST-ETHER-CHANNEL-2FE-AGGREGATED;
         vlan-tagging;
         aggregated-ether-options {
             minimum-links 2;
             link-speed 100m;

- a. r. i. rangkayo sutan