[j-nsp] JUNOScript API error

[Simon Chen]

My experience is that JUNOScript would try to initiate the connection
to a weird port - I cannot remember which port that it, but you can
find out easily by doing a tcpdump.

Basically what I did was locating that port number in the source code
and changing it to 22.

Hope this helps.

-Simon

On Thu, Jul 17, 2008 at 12:04 PM, Boyd, Benjamin R
<Benjamin.R.Boyd at windstream.com> wrote:
> All,
>
> I'm playing with JUNOScript and after installation I get the following
> error:
>
> [get_chassis_inventory]# perl get_chassis_inventory.pl x.x.x.x -m ssh
> login: *****
> password:
> ERROR[1]: recv failed: EOF
> ERROR[2]: initial handshake with JUNOScript server failed
>
> Has anyone seen this or know the fix/cause?
>
>
>  -Ben
>
> ***************************************************************************************
>
> The information contained in this message, including attachments, may contain
> privileged or confidential information that is intended to be delivered only to the
> person identified above. If you are not the intended recipient, or the person
> responsible for delivering this message to the intended recipient, Windstream requests
> that you immediately notify the sender and asks that you do not read the message or its
> attachments, and that you delete them without copying or sending them to anyone else.
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>