[j-nsp] vpls remote mac learning on M20 on Junos 9.1?

Marlon Duksa mduksa at gmail.com
Thu Jul 31 09:00:18 EDT 2008


A-ha. Thanks.
I needed an additional router in my setup, so I was using this older M20.
Obviously this won't work. If I segment my M320 into two logical routers,
then one of those two logical routers on M320  would replace the M20 and I
should be able to proceed with this VPLS setup, correct?

On Thu, Jul 31, 2008 at 1:53 AM, <sthaug at nethelp.no> wrote:

> > Yes, no tp hardware in the chassis, this is why I'm using no-tunnel
> > -services cmd.
> >
> > Is there any workaround? Or at least the documentation mentioning that
> VPLS
> > PE is not supported on certain FPCs...
>
> Documented for instance at
>
>
> http://www.juniper.net/techpubs/software/junos/junos91/swconfig-vpns/configuring-vpls-without-a-tunnel-services-pic.html#id-11543506
>
> "When you configure VPLS without a Tunnel Services PIC by including
> the no-tunnel-services statement, the following limitations apply:
> An Enhanced FPC is required."
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
>


More information about the juniper-nsp mailing list