[j-nsp] ISIS between T640 and Redback SE800

david.roy at orange-ftgroup.com david.roy at orange-ftgroup.com
Tue Jun 10 09:59:10 EDT 2008


Hi all,
 
I encountered some problems to established ISIS between a T640 and a
Redback SE800 through an AE.
The ISIS level 2 adjacency is well established but the LSP send by the
Redback (correct on the redback) seems to be corrupt on the T640 (I've
only the hearder and the sequence number is 0).
 
 
T640 ------AE8.1500 -------Redback (Virtual routeur VR1)
 
Do you have a idea regarding this issue ?
Thanks
Regards,
david
 


*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees. 
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration. 
France Telecom Group shall not be liable for the message if altered, changed or falsified.
If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
********************************


More information about the juniper-nsp mailing list