[j-nsp] ISIS between T640 and Redback SE800

[Erdem Sener]

You could maybe try to enable md5 auth for ISIS, which would serv as a
protection mechanism
as well for packet corruption.

HTH
Erdem

On Tue, Jun 10, 2008 at 3:59 PM,  <david.roy at orange-ftgroup.com> wrote:
>
> Hi all,
>
> I encountered some problems to established ISIS between a T640 and a
> Redback SE800 through an AE.
> The ISIS level 2 adjacency is well established but the LSP send by the
> Redback (correct on the redback) seems to be corrupt on the T640 (I've
> only the hearder and the sequence number is 0).
>
>
> T640 ------AE8.1500 -------Redback (Virtual routeur VR1)
>
> Do you have a idea regarding this issue ?
> Thanks
> Regards,
> david
>
>
>
> *********************************
> This message and any attachments (the "message") are confidential and intended solely for the addressees.
> Any unauthorised use or dissemination is prohibited.
> Messages are susceptible to alteration.
> France Telecom Group shall not be liable for the message if altered, changed or falsified.
> If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
> ********************************
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>