[j-nsp] L3 incompletes

Paul Goyette pgoyette at juniper.net
Fri Jun 13 10:26:58 EDT 2008


> > No, that should result in "policed discards", not "L3 incompletes".
> > This commonly shows up when the neighbor is from Brand-C and has
> > cdp enabled.  :)
> >
> 
> I'm hesitant to attempt to correct anyone with a 
> "juniper.net" address, but I'm not sure this is entirely 
> true.  Discarded OSPF packets should show up as layer 3, not 
> layer 2, so I don't believe policed discards counts in this 
> situation.  It is correct that CDP/LLDP/VTP/etc. will show up 
> as policed discards.

HeHeHe!  Just cuz I'm from Juniper doesn't mean I'm always right!

You are correct, Eric, the OSPF packets would be NEITHER "L3
incomplete" nor "Policed discard".


More information about the juniper-nsp mailing list