[j-nsp] Load-Balance on Internet Processor II

[Stefan Fouant]

I think the naming is lsq-x/x/x when configuring either the Adaptive
Services or Multi-Services PICs.

Stefan Fouant
Principal Network Engineer
NeuStar, Inc. - http://www.neustar.biz
GPG Key ID: 0xB5E3803D

On Wed, Jun 25, 2008 at 10:40 AM, Stefan Fouant <sfouant at gmail.com> wrote:
> Yep... on J-Series, the interface naming for the Layer 2 Services
> interface is ls-x/x/x.
>
> Stefan Fouant
> Principal Network Engineer
> NeuStar, Inc. - http://www.neustar.biz
> GPG Key ID: 0xB5E3803D
>
> On Wed, Jun 25, 2008 at 10:21 AM, Ilker YILMAZ <ilkeryilmaz17 at gmail.com> wrote:
>>
>> Hello Steinar,
>>
>> Do you know which interface naming is available at J4350 & M10i for MLPPP ?
>> I see ls-0/0/0 interface at J4350 and lsi.x at M10i (Includes MSPIC)
>>
>> Are these ok?
>>
>> Thanks!
>> Ilker
>>
>> -----Original Message-----
>> From: sthaug at nethelp.no [mailto:sthaug at nethelp.no]
>> Sent: Tuesday, June 10, 2008 1:42 PM
>> To: ilkeryilmaz17 at gmail.com
>> Cc: juniper-nsp at puck.nether.net
>> Subject: Re: [j-nsp] Load-Balance on Internet Processor II
>>
>>> I'm curious if anybody knows a workaround doing load balancing per
>>> packet on an m10i. I have a J4350 2xE1 connected to a M10i 2xE1 trying
>>> to do my best but as Juniper says;
>>
>> Sorry, can't be done. Load balancing will be per flow, as you have already
>> found out. If you need to have the full 2xE1 capacity available for one
>> single flow, you need to use multilink PPP or similar (requires AS PIC or
>> Multiservices PIC).
>>
>> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
>>
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>