[j-nsp] Load-Balance on Internet Processor II

[Stefan Fouant]

Yep... on J-Series, the interface naming for the Layer 2 Services
interface is ls-x/x/x.

Stefan Fouant
Principal Network Engineer
NeuStar, Inc. - http://www.neustar.biz
GPG Key ID: 0xB5E3803D

On Wed, Jun 25, 2008 at 10:21 AM, Ilker YILMAZ <ilkeryilmaz17 at gmail.com> wrote:
>
> Hello Steinar,
>
> Do you know which interface naming is available at J4350 & M10i for MLPPP ?
> I see ls-0/0/0 interface at J4350 and lsi.x at M10i (Includes MSPIC)
>
> Are these ok?
>
> Thanks!
> Ilker
>
> -----Original Message-----
> From: sthaug at nethelp.no [mailto:sthaug at nethelp.no]
> Sent: Tuesday, June 10, 2008 1:42 PM
> To: ilkeryilmaz17 at gmail.com
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Load-Balance on Internet Processor II
>
>> I'm curious if anybody knows a workaround doing load balancing per
>> packet on an m10i. I have a J4350 2xE1 connected to a M10i 2xE1 trying
>> to do my best but as Juniper says;
>
> Sorry, can't be done. Load balancing will be per flow, as you have already
> found out. If you need to have the full 2xE1 capacity available for one
> single flow, you need to use multilink PPP or similar (requires AS PIC or
> Multiservices PIC).
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>