[j-nsp] Load-Balance on Internet Processor II

[Ilker YILMAZ]

Hello Steinar,

Do you know which interface naming is available at J4350 & M10i for MLPPP ?
I see ls-0/0/0 interface at J4350 and lsi.x at M10i (Includes MSPIC)

Are these ok?

Thanks!
Ilker

-----Original Message-----
From: sthaug at nethelp.no [mailto:sthaug at nethelp.no]
Sent: Tuesday, June 10, 2008 1:42 PM
To: ilkeryilmaz17 at gmail.com
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Load-Balance on Internet Processor II

> I'm curious if anybody knows a workaround doing load balancing per
> packet on an m10i. I have a J4350 2xE1 connected to a M10i 2xE1 trying
> to do my best but as Juniper says;

Sorry, can't be done. Load balancing will be per flow, as you have already
found out. If you need to have the full 2xE1 capacity available for one
single flow, you need to use multilink PPP or similar (requires AS PIC or
Multiservices PIC).

Steinar Haug, Nethelp consulting, sthaug at nethelp.no