[j-nsp] Load-Balance on Internet Processor II

[sthaug at nethelp.no]

> I'm curious if anybody knows a workaround doing load balancing per packet on
> an m10i. I have a J4350 2xE1 connected to a M10i 2xE1 trying to do my best
> but as Juniper says;

Sorry, can't be done. Load balancing will be per flow, as you have already
found out. If you need to have the full 2xE1 capacity available for one
single flow, you need to use multilink PPP or similar (requires AS PIC or
Multiservices PIC).

Steinar Haug, Nethelp consulting, sthaug at nethelp.no