[j-nsp] M10 FEB heap usage (RPF/route options)

Richard A Steenbergen ras at e-gerbil.net
Wed Mar 19 05:55:50 EDT 2008

On Wed, Mar 19, 2008 at 03:34:24AM -0500, Hyunseog Ryu wrote:
> I think you may consider to upgrade the memory.
> If you use some feature set such as rpf-check, it will build another set 
> of table to consume the memory. 
> So if you use rpf-check, you can disable it to decrease heap memory 
> utilization problem. 
> But eventually if you want to hold full routing table, you may have to 
> upgrade the memory to 128M. 
> I think M10 FEB can be upgrade up to 128M.


Confirmed working by dozens of people now. Not all of the similar SODIMMs 
will fit, but this one definitely does. If you must keep your old M5/M10s 
alive, this is infinitely better than trying to diddle with the software 
to squeeze another few routes in.

Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)

More information about the juniper-nsp mailing list