[j-nsp] Traffic sampling

[Travers Stark]

Sorry I should have explained myself better!!


The problem is that nothing is exported to my netflow server.

If you look at the Output command it has inactive next to it     "
inactive: output { "

I assume I have missed something.


-----Original Message-----
From: Erdem Sener [mailto:erdems at gmail.com] 
Sent: Sunday, May 04, 2008 12:13 PM
To: Travers Stark
Subject: Re: [j-nsp] Traffic sampling

Hey Travers,

 What is your problem exactly?

Cheers,
Erdem

On Sun, May 4, 2008 at 2:21 AM, Travers Stark
<travers at tjsnetworkconsulting.com.au> wrote:
> Guys,
>
>  Wonder if anyone can help with j flow traffic sampling
>
>  I have setup the following. Notice the  inactive: output {
>
>  Nothing is being sent. I have installed the license for J-flow
>
>  I have probably missed something simple.
>
>  Any help would be appreciated
>
>  forwarding-options {
>     sampling {
>         input {
>             family inet {
>                 rate 100;
>                 run-length 9;
>                 max-packets-per-second 9000;
>             }
>         }
>         inactive: output {
>             cflowd 119.63.216.75 {
>                 port 9996;
>                 source-address 119.63.216.3;
>                 version 5;
>                 no-local-dump;
>             }
>
>     ge-0/0/0 {
>         unit 0 {
>             description "Link to Backbone Network";
>             family inet {
>                 sampling {
>                     input;
>                     output;
>
>
>  Travers Stark
>
>
>
>
>  _______________________________________________
>  juniper-nsp mailing list juniper-nsp at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/juniper-nsp
>