[j-nsp] NSR, multicast, and VRFs?

Stefan Fouant sfouant at gmail.com
Mon May 5 13:48:38 EDT 2008


On Mon, May 5, 2008 at 11:42 AM, Dave Diller <dave at maxgigapop.net> wrote:
> Now, 9.1 says:
>
> Border Gateway Protocol (BGP), for unicast IPv4 and IPv6 address
> families only. If you configure any other address family, the BGP
> session will not come up on the backup router.
>
> which seems to say, relative to 9.0, that VRFs are OK but multicast is
> not.

IMHO, I would read that to say that L3 VPN VRFs are still not
supported as you wouldn't be able to configure the inet-vpn address
family.

Stefan Fouant


More information about the juniper-nsp mailing list