[j-nsp] Software Tool for Network Simulation with JUNOS-based Routers

[angel]

Jens Hoffmann wrote:
> Hi colleagues,
>
>  
>
> I'm looking for a Network Simulation Tool for JUNOS-based routers like
> DYNAMIPS for Cisco  (
> http://www.ipflow.utc.fr/index.php/Cisco_7200_Simulator ).
>
>  
>
> It's not my intention to build a router or a network based on OLIVE !
>   
This is what you need - run olive in several vmware instances. Then you 
can bridge ethernet interface of each vmware instance using built-in 
vmware tool - and you'll get what you need. And even more - it is 
possible to bridge to dynamips. Check hacki's forum 
(http://7200emu.hacki.at) about how to do that.
cheers,
Angel
>  
>
> It should be possible to simulate/emulate a network consists of 4-6
> Juniper-Routers.
>
>  
>
> Thanks a lot for any advice !
>
>  
>
> Regards,
>
> Jens
>
>  
>
>  
>
>  
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>